Famous Bathroom Grab Bar Installation Height References


Famous Bathroom Grab Bar Installation Height References. The grab bar must be installed in a horizontal position. Figure 34 (b) with seat at head of tub.

Where to Install Grab Bars YouTube
Where to Install Grab Bars YouTube from www.youtube.com

The ada toilet grab bar height is defined in standard 609.4. Center line of the bar located 39 (990 mm) minimum and 41 (1040 mm) maximum from the rear wall. The shower rail should be about 36 inches above the floor in a shower.

But I Would Strongly Recommend To Take Into Consideration The Height And Physical Capabilities Of The Person You Are Installing These Grab Bars For.


According to ada standards, grab bars are required in all accessible toilet stalls. Place the grab bar horizontally (east to west) about 33″ to 36″ from the floor to the top of the grab bar. The ada toilet grab bar height is defined in standard 609.4.

Place The Grab Bar Horizontally (East To West) About 33″ To 36″ From The Floor To The Top Of The Grab Bar.


If you are installing a grab bar that is less than 32″, shift the grab bar to the center of the wall to give more usable grab bar to the user when standing. It would be best if you installed two grab bars for a bathtub, one 9 inches above the tub and the second 33 inches to 36 inches above the floor. Be sure there is adequate room within the hollow area behind the wall so an anchoring device will work.

Grab Bar Position #1 (Side Wall) We Recommend One (1) Straight Grab Bar Placed Horizontally On The Wall Side Of The Toilet.


Each grab bar shall be installed 15 inches (380 mm) maximum from the head end wall and 12 inches (305 mm) maximum from the control end wall. Center line of the bar located 39 (990 mm) minimum and 41 (1040 mm) maximum from the rear wall. The other shall be 33 to 36 inches (840 mm to 915 mm) above the bathroom floor.

Ada Grab Bar Height , Length, Size, And Placement.


The most common length would be between 18″, 24″ 30″ or 36″. One grab bar on the back wall shall be located 9 inches (230 mm) above the rim of the tub. Two grab bars shall be installed on the back wall, one located in accordance with 609.4 and the other located 8 inches (205 mm) minimum and 10 inches (255 mm) maximum above the rim of the bathtub.

Typically, Grab Bars In The Shower Should Be Installed 33 To 36 Inches From The Floor Of The Bathroom (This Is According To Ada (Americans With Disabilities Act) Standards).


It is helpful to use this range as a guide for placement, but the most important part is selecting a height that feels comfortable and secure for the person using them. Most guidelines recommend that the bottom of longer grab bars is fitted 36 inches from the floor. The shower rail should be about 36 inches above the floor in a shower.


0 comments